Fully auto. car battery inter-cell welding and short-circuit test machine (HPVT-60ACX)

  • Fully auto. car battery inter-cell welding and short-circuit test machine
Inquiry Prev Next
Product description
Functions
This machine is used for the thru-the-partition (TTP) inter-cell welding connection for automotive batteries. After the welding process is done, a short circuit test is performed.

Machine operation
After the COS process, batteries will be conveyed to the first station, for the polarity and short circuit tests. Each battery is positioned automatically; if qualified, it will be sent to the welding station, and the welding probe will move downward to perform the welding automatically. After completion, the probe will retract to its original position automatically. If the welding process works abnormally, the machine will trigger an alarm, and unqualified batteries will be transferred to the rejection area.
Product features
  • Suitable for both traditional and MF automotive batteries.
  • MIYACHI welding controller.
  • User friendly design allows for high-precision adjustment.
  • The fixture can handle 1 × 6 and 3 × 2 battery types.
  • Servo-contrlled, pneumatic or hydraulic welding system.
  • Easily configurable touch panel control system.
  • Rejection station for unqualified batteries.
  • Maximum output voltage: 50 KVA (adjustable).
  • Auto-stop and auto-start system.
  • State-of-the-art guide rail design to avoid damaging the battery during transport.
  • Capacity: 150-280 pcs/h.
Product specification
  Product specification
Power consumption 52.12 KW
Air consumption 55 L/min (6 kg/cm2)
Dimensions approx. 4650 (W) × 2017 (D) × 2015 (H) mm
Weight approx. 1500 kg

Find other similar equipment on our dedicated inter-cell welding product page. You may also want to check out our car and motorcycle battery assembly lines.
Back to List